News

  • 0
  • 0

What is Tantalum Carbide TaC Powder?

Risk aversion plunged on the positive news of the Russia-Ukraine talks. After several days of rising oil prices, the price of precious metals continued to fall. Domestic futures markets remain stable for the time being.

Back in international markets, WTI crude futures briefly dipped below $100 a barrel, while Brent crude hit its lowest intraday level in nearly two weeks. Spot gold briefly fell below $1,900 an ounce. Comex gold futures closed down 1.1 percent at $1,918.4 an ounce. Comex silver futures closed down 1.14 percent at $24.91 an ounce. "Recently, crude oil prices have been extremely sensitive to changes in geopolitical news." Traders believe that the current oil price is still in the broad impact, Ukraine will still be a premium in the case, although the market further decline, but should not be too pessimistic, it is recommended to wait and see for the time being. The Ukrainian premium is still there and there will be some volatility in the Tantalum Carbide powder market.

Introduction to Tantalum Carbide TaC Powder
Tantalum carbide or TaC is a light brown metallic cubic crystal powder, belonging to the sodium chloride cubic crystal system. The density is 14.3g/cm3.
Insoluble in water, insoluble in inorganic acid, soluble in hydrofluoric acid and nitric acid mixed acid and decomposition. It has strong oxidation resistance and is easily melted and decomposed by potassium pyrosulfate. Has high conductivity, and resistance of 30Ω at room temperature, showing superconductivity.
Tantalum carbide is used for powder metallurgy, cutting tools, fine ceramics, chemical vapor deposition, hard wear-resistant alloy cutting tools, molds, and additives for wear and corrosion resistance structural components to improve the toughness of alloys. The sintered body of tantalum carbide shows a golden color and can be used as watch decoration.
 

Tantalum Carbide TaC Powder Properties
Other Names tantalum(IV) carbide, TaC powder
CAS No. 12070-06-3
Compound Formula TaC
Molecular Weight 192.96
Appearance brown to dark brown powder
Melting Point 3850°C
Boiling Point 4780-5470 °C
Density 14.3-14.7g/cm3
Solubility in H2O insoluble
Exact Mass 192.948

 

Tantalum Carbide TaC Powder Cas 12070-06-3
 

 

Preparation Methods of Tantalum Carbide TaC Powder
1. In industry, mix tantalum pentoxide powder with solid carbon ball mills, get the mixture reduced and carburized in a non-oxidizing atmosphere (mainly vacuum and argon atmosphere) at 1700, to prepare TaC powder with a particle size greater than 2μm.
2. Nano tantalum carbide powder was prepared by heat treatment in the non-oxidizing atmosphere with the liquid precursor method. 5mL of anhydrous ethanol was added into a small beaker containing 0.50gTaCL5, and stirred evenly with a glass rod. Then, it was put into an ultrasonic cleaner with a heating temperature of 55 and a working frequency of 40kHz, ultrasonic power was 80W. After ultrasonic oscillation for 5-10min, 0.10g nano-activated carbon was added, and the oscillation continued for 15-20min. Pour it into the crucible and coat it evenly on the inner wall, and dry it with a hot fan. The crucible with the sample was placed in a vacuum hot pressing furnace, and high-temperature treatment was carried out at 1300 in a vacuum of 100Pa or hydrogen atmosphere; Or at 1400 in argon atmosphere, holding time is 0.5h, the heating rate is 20/min. After the experiment, brush the products in the crucible with a brush. 
3. Heat in the air to convert to tantalum pentoxide. Can be fused with potassium pyrosulfate.  By metal tantalum and carbon or tantalum pentoxide and black in an inert atmosphere heated to 1900 reaction prepared.
4. Use tantalum pentoxide and methane as the reaction gas, argon as the carrier, using silicon carbide resistance from the external radiation heating, carbonization, or tantalum pentoxide mixed with carbon black, pressurized powder molding, heating in hydrogen or vacuum.
 

Applications of Tantalum Carbide TaC Powder
It is widely used in industry and the military. In cemented carbide, it is widely used as a kind of additive. Its main function is to improve the high-temperature strength of cemented carbide and inhibit the growth of tungsten carbide particles. 
In cutting tools, used as a hard coating to increase the chemical resistance and wear resistance of the base metal; 
In the military, it can be used as a coating for jet engine turbine blades and rocket nozzles, which can significantly improve their ablative resistance and prolong their service life. 
Because of its good conductivity, it can also be used as electrode material, using electric discharge wire cutting into complex shapes; 
And as the second phase particle reinforced metal matrix composites, it can be used in aerospace, metallurgy, building materials, electric power, hydropower, mining, and other fields.
 

Main Supplier of Tantalum Carbide TaC Powder
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality tantalum carbide TaC powder, please feel free to contact us and send an inquiry. ([email protected])

Recently, the first press conference of the Boao Forum For Asia Annual Conference 2022 was held. Two flagship reports were released at the conference: "Asia's Economic Prospects and Integration Process 2022" and "Sustainable Asia and the World 2022-Green Transformation in Action in Asia".

The flagship report points out that the global economy will recover in 2021, and the pace of economic integration in the Asia-Pacific has not stopped even in the face of the impact of COVID-19. The Asia-Pacific region has provided new impetus for the world's economic recovery and institutional building.  

The report gives an outlook on the Asian economy, noting that a number of factors will affect Asian economic growth. For example, mutated strains such as Delta and Omicron have become more transmissible, and many economies are experiencing epidemic peaks again. The Ukraine crisis has triggered geopolitical changes in Asia and Europe, leading to higher commodity prices, which may affect the global energy supply and energy transformation.

The report pointed out that the Asian economy will still be in the process of recovery in 2022, but the growth rate may moderate. According to the report, Asia's economic growth in 2022 is likely to be lower than the current IMF forecast, which is projected at 4.8%.

Affected by several factors, the supply of the Tantalum Carbide powder is erratic and thus its prices are expected to go higher in the future.

Inquiry us

Our Latest News

Introduction to aluminum uses and properties Additives

Introduction to aluminum uses and properties Additives Whethe…

November coke price shock back to the ams 5510 price of the impact

November coke price shock back to the ams 5510 price of the impact…

The decision by major producers to maintain production cuts has had an impact on complex sand casting price

The decision by major producers to maintain production cuts has had an impact on complex sand casting price…