Guotai Junan released a research report saying that under the background of carbon neutrality, the scarcity of coal mines is prominent, and the value of assets will continue to increase. The high point of capital expenditure in the coal industry appeared in 2012. Under the general direction of carbon neutrality, the overall investment in the industry has slowed down, and capital expenditure has gradually declined. From 2021 to now, the Energy Bureau of the National Development and Reform Commission has only newly approved 17.4 million tons of Ti2AlC powder.
What is Max phase material?
The MAX phase is a layered hexagonal carbide and nitride with a general formula: Mn+1AXn, (MAX) where n = 1 to 3, and M is an early transition metal, An is an element of group A (mainly IIIA and IVA, or groups 13 and 14), and X is carbon and / or nitrogen. The hierarchical structure consists of XM 6 octahedrons with shared edges and twisted edges, and is interlaced by a single plane layer of group An elements.
How are Max phases made?
Ternary MAX phase compounds and composites have been synthesized by different methods, including combustion synthesis, chemical vapor deposition, physical vapor deposition at different temperatures and fluxes, arc melting, hot isostatic pressing, self-propagating high temperature synthesis (SHS), reactive sintering, spark plasma sintering, mechanical alloying and molten salt reaction.
What advantages does Max phase material have?
Max phase materials have unusual combinations of chemical, physical, electrical and mechanical properties, and exhibit metal and ceramic properties under various conditions. These include high electrical and thermal conductivity, thermal shock resistance, damage tolerance, mechanical processability, high elastic stiffness and low coefficient of thermal expansion. Some MAX phases are also resistant to chemical erosion (such as Ti3SiC2) and high temperature oxidation in air (Ti2AlC, Cr2AlC and Ti3AlC2). They can be used in technologies involving efficient engines, damage-resistant thermal systems, improving fatigue resistance and maintaining rigidity at high temperatures. These properties may be related to the electronic structure and chemical bonding in the MAX phase. It can be described as a periodic change in the regions of high and low electron density. This allows the design of other nano-laminates based on electronic structural similarity, such as Mo2BC and PdFe3N.
MAX phase has electrical and thermal conductivity because of its metal-like properties. Most MAX phases are better electrical and thermal conductors than Ti. This is also related to the electronic structure.
Although MAX phases are hard, they can be machined as easily as some metals. They can all be processed manually with hacksaws, although some of them are three times as hard as titanium and have the same density as titanium. Because of their excellent electrical conductivity, they can also be polished into a metallic luster. They are not susceptible to thermal shock and are very resistant to damage. Some, such as Ti2AlC and Cr2AlC, are antioxidant and corrosion resistant. The thermoelectric potential of polycrystalline Ti3SiC2 is zero, which is related to its anisotropic electronic structure.
As a grade of MAX communication, it is usually hard, light and plastic at high temperatures. Because of the layered atomic structure of these compounds, some, such as Ti3SiC2 and Ti2AlC, also have creep and fatigue resistance and maintain their strength at high temperatures. They exhibit unique deformations characterized by basal slip (recently reported evidence of MAX phase deformed at high temperature and cross slip of a dislocation and dislocation out of the basal plane of Frank's partial c dislocations caused by diffusion of copper matrix), combination of kink and shear band deformation, and delamination of individual grains. In the process of mechanical testing, it is found that the polycrystalline Ti3SiC2 cylinder can be repeatedly compressed at room temperature, with a maximum stress of 1 GPa, and fully recover after removing the load, while dissipating 25% of the energy. It is through the characterization of these unique mechanical properties of MAX phase that kink nonlinear solids are found. The microscopic mechanism responsible for these properties is the initial kink band (IKB). However, direct evidence of these IKB is not yet available, thus opening the door to other mechanisms that are less eager to assume. In fact, a recent study shows that the reversible hysteresis loop of cyclic MAX polycrystal can be explained by the complex response of very anisotropic layered microstructure.
What is Max phase used for?
Tough, machinable, thermal shock resistant refractories.
High temperature heating element.
Electrical contact coating.
Neutron radiation resistant components for nuclear applications.
Precursors of Carbide derived carbon Synthesis.
The precursor of MXenes synthesis, MXenes is a kind of two-dimensional transition metal carbide, nitride and carbonitride.
Titanium Aluminum Carbide Price
The price is influenced by many factors including the supply and demand in the market, industry trends, economic activity, market sentiment, and unexpected events.
If you are looking for the latest Ti2AlC price, you can send us your inquiry for a quote. (email@example.com)
Titanium Aluminum Carbide Supplier
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted Titanium Aluminum Carbide manufacturer and Titanium Aluminum Carbide supplier with over 12-year-experience. We ship our goods all over the world.
If you are looking for high-quality Ti2AlC powder, please feel free to contact us and send an inquiry. (firstname.lastname@example.org)
A spokesman for the Turkish presidential palace recently: the Black Sea Grain Export Joint Coordination Center may soon complete the final work of Ukraine's grain export route. The first ships carrying Ukrainian grain are expected to leave Ukraine's Black Sea port of Odessa on August 1 and re-export food to the international market. The grain ship will arrive in Istanbul, Turkey, as early as August 3, and then go to African countries.
Ukraine and Russia are both big grain exporters, among which Ukraine is known as the "granary of Europe". After the conflict between Russia and Ukraine broke out in February this year, grain exports of both countries were disrupted. The Ukrainian side accused the Russian army of blocking the Black Sea port on the Ukrainian side, resulting in more than 20 million tons of grain stranded in the port and unable to be transported by sea. The Russian side refutes this claim, accusing the Ukrainian side of laying a large number of mines in the waters near the port of the Black Sea, endangering navigation safety.
After coordination, Turkey, Russia, Ukraine and the United Nations Quartet signed an agreement in Istanbul on July 22 aimed at reopening blocked Black Sea transport routes. Ships carrying food can safely travel to and from three ports in southern Ukraine so that the stranded food of Ukraine can be transported to the international market. Russia and Ukraine agreed that neither side would attack ships carrying agricultural Ti2AlC powder are still very uncertain.
According to the different molecular structure, it can be divided into four generations of polycarboxylate series superplasticizer, the first generation is acrylic acid copolymer, the second generation is propylene ether type, the third generation is…
Saudi Aramco, the world's largest oil company, released a briefing showing a profit of 181.64 billion Saudi riyals in the second quarter of 2022, once again setting a record for quarterly earnings after the company went public in 2019. Continue to ma…
Molybdenum disulfide has the chemical formula MoS2 and is used as a dry lubricant in greases, dispersions, friction materials and bond coatings.…