TRUNNANO | Ceramic powder, graphite powder,boron powder, and 3D printing metal Nanomaterial supplier & Manufacturer.
The Biden administration plans to ease sanctions on Venezuelan oil to allow more of the country's crude to reach Europe.
The U.S. will allow European companies still operating in Venezuela to immediately transfer more oil to the continent, while allowing Chevron to negotiate a resumption of operations in Venezuela, according to people familiar with the matter. Venezuela's OPPOSITION, which is backed by the United States, is understood to favor the move. Tight global oil supplies have sent crude and fuel costs soaring, threatening to add to already high inflation. Increasing Venezuelan crude exports would help ease supply constraints while also helping to reduce Europe's dependence on Russian energy.
The US has sought to encourage talks between the Venezuelan government and the US-backed opposition to open the way to free and fair elections by extending a limited license held by Chevron to allow the oil company to maintain its operations in Venezuela and negotiate future operations.
The United States reportedly did not extend a permit to Allow Chevron to drill and sell Venezuelan crude, as the company had hoped.
The license extension will allow Chevron to negotiate with State-run Petroleos de Venezuela SA, with which it has a joint venture. Previously, the company could not directly negotiate with any officials sanctioned by the United States. Chevron has been lobbying the United States to allow it to drill for Venezuelan crude and sell it on world markets to help lower energy prices amid the Russia-Ukraine war.
Affected by the ever-changing international situation, the supply and prices of many commodities like the boron nitride powder are still very uncertain.
Cubic boron nitride (CBN) is a super-hard material synthesized by hexagonal boron nitride and catalyst at high temperature and high pressure. Among the super-hard materials which have been industrially applied, the hardness of CBN is second only to diamond. The thermal stability of cubic boron nitride is much higher than that of diamond, and it has greater chemical stability to iron series metal elements, so cubic boron nitride abrasives are widely used in the field of cutting and grinding of iron-based metal products.
Types of Cubic Boron Nitride CBN
There are two kinds of cubic boron nitride: single crystal and polycrystalline sintered body.
The single crystal is prepared by hexagonal boron nitride and catalyst at a pressure of 3000 ~ 8000 MPA and a temperature of 800℃ to 1900℃. Typical catalyst materials are selected from alkali metals, alkaline earth metals, tin, lead, antimony and their nitrides. The crystal forms of cubic boron nitride include tetrahedral truncated cone, octahedron, crooked crystal and double crystal. Industrial cubic boron nitride is available in black, amber and metal-plated surfaces, and the particle size is usually less than 1 mm.
Application of Boron Nitride Polycrystals in Metal Cutting
Cubic boron nitride polycrystal (PCBN) tool is a kind of super-hard material product which is composed of many fine grains (0.1μm 100μm) CBN.
It not only has high hardness and high wear resistance, but also has the characteristics of high toughness, chemical inertia, red hardness and so on, and can be sharpened by diamond grinding wheel. It shows excellent cutting performance in all aspects of cutting, and can achieve stable cutting at high temperature. it is especially suitable for machining all kinds of hardened steel, tool steel, chilled cast iron and other high hardness difficult-to-machining materials. The tool has the advantages of sharp cutting, good shape retention, high wear resistance, small unit wear, less correction times, and is conducive to automatic machining. it is suitable for all cutting processes from roughing to finishing.
Performance and Properties of PCBN
PCBN not only has most of the properties of CBN, but also overcomes the shortcomings of directional cleavage of CBN single crystal plane, and has many performance advantages.
1. High hardness. The hardness of PCBN tool is second only to diamond and much higher than that of cemented carbide and ceramic tools, so it can process hardened steel, cast iron and cemented carbide with hardness above HRC60.
2. High wear resistance. The wear resistance of PCBN tools is much higher than that of cemented carbide and ceramics, and its service life is usually 3 to 5 times longer than that of ceramic tools and 5 times to 15 times that of cemented carbide tools.
3. High chemical inertia. The chemical reaction between PCBN and iron group elements and their alloys is not easy to occur at 1200℃ to 1300℃, which overcomes the chemical affinity between polycrystalline diamond tools and iron, has high oxidation resistance, and the bonding and diffusion effect on various materials is much less than that of cemented carbide.
4. High thermal stability. The heat resistance of PCBN can reach 1400℃, which is much higher than that of diamond tools (700℃ to 800℃). It is proved that the cutting temperature above 1100℃ can still maintain high sharp cutting performance, which is suitable for dry cutting.
5. High thermal conductivity. Among all kinds of tool materials, the thermal conductivity of PCBN is 79.54W/(m·k), which is second only to diamond and much better than cemented carbide, and the thermal conductivity of PCBN will be improved with the increase of temperature.
6. Low friction coefficient. Compared with other tool materials, the friction coefficient of PCBN is low. The friction coefficient between PCBN and different materials is about 0.1 ~ 0.3, while that of cemented carbide is 0.4 ~ 0.6, and the friction coefficient decreases with the increase of cutting speed, so that the cutting force decreases and the phenomenon of chip sticking is reduced.
Application of Cubic Boron Nitride in Grinding Field
Cubic boron nitride grinding tools have excellent grinding performance, which can complete the processing of difficult-to-grind materials, improve productivity and effectively improve the grinding quality of workpieces. It can also strictly control the shape and size of the workpiece and improve the surface integrity of the workpiece after grinding, so as to improve the fatigue strength of the parts and prolong the service life.
Cubic boron nitride micro-powder is suitable for resin, metal, ceramic and other binder systems, can also be used in the production of polycrystalline composite sheets, can also be used as loose abrasives, grinding paste and so on.
Supplier of Boron Nitride BN Powder
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and nanomaterials including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality BN powder, please feel free to contact us and send an inquiry. ([email protected])
Recently, Rosneft announced that a large oil deposit has been discovered in Bochao Lahai, with reserves equivalent to 82 million tons of oil. The discovery benefited from oil drilling in the Medinskova Landsky area. Rosneft pointed out that the discovery proves the great oil potential of the Timano-Bechula region, which will be the basis for the company to continue to research and develop the region.
In addition, Russian billionaire Vladimir Potanin, the largest shareholder of Norilsk Nickel, said recently that he was prepared to discuss the merger of Norilsk Nickel and aluminum giant Rusal.
"We have received a proposal from Rusal management to discuss a merger with Norilsk Nickel as an alternative to extending the shareholder agreement," Potanin said in an interview with Russia's RBC TV channel. I sent a letter confirming that we agreed to initiate discussions with Rusal on a merger. "
Potanin owns about 35 per cent of Norilsk Nickel. Norilsk Nickel is a major producer of nickel and copper and the world's largest palladium miner. Norilsk Nickel and Rusal had a market capitalization of $49 billion and $15 billion, respectively, as of Monday local time, according to Refinitiv Eikon.
Luoyang Tongrun Nano Technology is a trusted chemical manufacturer and supplier providing high-quality chemicals and Nanomaterials. If you are looking for the boron nitride powder, please feel free to contact us and send an inquiry.
Brazil, the world's largest sugar producer, has recently switched to ethanol tantalum carbide powder price is predicted to go higher in the future. Researchers have developed two new heat-resistant materials, tantalum carbide (TaC) and ha…
Sweden is in talks with Turkey on joining NATO and looks forward to strengthening cooperation with Turkey in security and counter-terrorism, Swedish Prime Minister Anders Andersson said recently. Andersson held a joint press conference with visiting…
Oil prices plunged on July 5th to their lowest level in nearly three months. By the end of the day, U.S. CRUDE for August delivery was down $8.93, or 8.24%, at $99.50 / BB…