The price of nickel and stainless steel rose together. Nickel afternoon hand in hand with stainless steel together turn red up. Due to the temporary easing of geopolitical risks, risk assets are now picking up, nonferrous metals, stock markets, and so on have risen, the overall mood has temporarily improved. Ore prices are strong, the overlay of the epidemic on spot logistics or the formation of a certain impact. Phase, nickel and stainless steel materials to maintain high wide concussion pattern.
Nickel prices based on low inventory, tight supply and demand will still show high wide fluctuations. In addition, the current LME has low liquidity, so its sensitivity to capital will remain relatively high. Shanghai nickel-wide fluctuations are expected to continue in the 200,000-250,000 yuan wide repeated fluctuation trend. While stainless steel is affected by the stronger nickel pig iron, the cost support continues, but note that under the current demand is not effectively released, the upward space may also be affected, the stage is expected to fluctuate between 20000 and 22,000 yuan. The price of nickel produced such fluctuations, indicating that the price of the Cobalt Chromium Molybdenum may also be affected to a certain extent.
About 3D Metal Printing Cobalt Chromium Molybdenum CoCrMo Powder:
CoCrMo alloy (CoCrMo) is a kind of cobalt base alloy, is also commonly known as Stellite (Stellite) alloy, is a kind of wear resistance and corrosion resistance of cobalt base alloy.The original cobalt base alloy is a cobalt chromium binary alloy, later developed into a cobalt chromium tungsten ternary composition, and then later the development of cobalt chromium molybdenum alloy.Cobalt-chromium-molybdenum alloys are alloys with cobalt as the main component and contain a considerable amount of chromium, molybdenum, and a small amount of nickel, carbon, and occasionally iron. Cobalt and chromium are two basic elements of cobalt-based alloys while adding molybdenum can produce finer grains and higher strength after casting or forging.Cobalt-chrome-molybdenum alloys are basically divided into two categories: CoCrMo alloy and ConicrMo alloy;
1. The first category is CoCrMo alloys, usually cast products; The improvement of the technology greatly improves the comprehensive mechanical properties of the material.
2. The other type is ConicrMo alloys, which are usually (hot) forged and precision machined. Cast CoCrMo alloys have been used in dentistry for decades and are currently used to make artificial joints, while forged ConicrMo alloys are used to make heavy joints that can withstand heavy loads such as knees and hips. TRUNNANO is a trusted global 3D Metal Printing Cobalt Chromium Molybdenum CoCrMo Powder supplier. Feel free to send an inquiry about the latest price of Cobalt Chromium Molybdenum CoCrMo Powder at any time.
Cobalt Chromium Molybdenum Characteristics: The powder is with high powder sphericity, smooth surface, less satellite balls, low oxygen content, uniform particle size distribution, good fluidity and high bulk density and tap density.
Cobalt Chromium Molybdenum Applicable Process: The powder can be used in laser/electron beam additive manufacturing (SLM/EBM), powder metallurgy (PM), spray coating, welding and other processes.
Cobalt Chromium Molybdenum Applicable Equipment: The powder can be used in various types of metal 3D printers, including Renishaw in the UK, EOS (EOSINT M series) in Germany, Concept Laser, 3D systems in the United States, laser melting equipment, and domestic research institutes and enterprises. Research and development of selected laser melting equipment, such as Huaying Hi-Tech, Platinum and so on.
How is 3D Metal Printing Cobalt Chromium Molybdenum CoCrMo Powder Produced?
Water atomization method, it is the use of medium frequency induction furnace melting materials alloy, the melt leakage by only a few millimeters in diameter eye forming metal liquid column, in the process of falling by more than surrounded by high-pressure water metal liquid column, a shock to turn it into a metal powder, and then again through the water, powder separation device, will collect the wet powder dry can. Using radiofrequency (rf) plasma spheroidization system for water atomized powder was prepared by the irregular cobalt chromium molybdenum alloy powder for further processing, after a series of processes such as plasma zone melting solidification, ultimately morphology rules (≧ 90%), high rate, high sphericity and good performance of high packing density, micron grade spherical cobalt chromium molybdenum alloy powder.
Applications of 3D Metal Printing Cobalt Chromium Molybdenum CoCrMo Powder :
Depending on the composition of the alloy, CoCrMo alloy can be made into welding wire, powder for hard surfacing, thermal spraying, spray welding and other processes, but also can be made into casting and forging parts and powder metallurgy parts.
CoCrMo alloys are particularly susceptible to work hardening and therefore cannot be manufactured in the same way as other metals, requiring vacuum precision casting instead. Controlling the mold temperature can control the grain size of the casting. The formation of coarse grains at higher temperatures will reduce the strength, but it will also precipitate large and far apart carbides and reduce the brittleness of the material.
CoNiCrMo alloy is one of the promising forging cobalt-base alloy, originally called MP35N, when under stress, can be in the water of the sea (containing chloride ions) has high corrosion resistance, cold working can increase the strength of the alloy, but cold work have considerable difficulty, especially in manufacturing large devices, such as hip handle, only hot forging was suitable.
CoNiCrMo alloy wear-resistant properties of forging and casting CoCrMo alloy has good fatigue resistance and the advantage of high tensile strength, so it is suitable for application in long life and do not need or stress fatigue fracture, hip place of artificial joints, for example, for the implant is deeply embedded in the femoral bone marrow catheter this difficult and costly in terms of operation, This advantage is very important.
The elastic modulus of cobalt-based alloys does not change with the maximum tensile strength, which ranges from 220 to 234 GPa and is higher than that of other materials such as stainless steel.
CoCrMo alloy powder is mainly used for 3D printing of biomedical materials such as teeth, human scaffolds and artificial joints.
Cobalt Chromium Molybdenum Specifications: 0-45 μm, 0-53 μm, 15-45 μm, 15-53 μm, 45-105 μm. (All kinds of granular metal powder can be customized according to customer requirements)
Storage Condition of Cobalt Chromium Molybdenum CoCrMo Powder:
The damp reunion will affect CoCrMo powder dispersion performance and using effects, therefore, cobalt chromium molybdenum CoCrMo powder should be sealed in vacuum packing and stored in cool and dry room, the cobalt chromium molybdenum CoCrMo powder can not be exposure to air. In addition, the cobalt chromium molybdenum CoCrMo powder should be avoided under stress.
Packing & Shipping of Cobalt Chromium Molybdenum CoCrMo Powder:
We have many different kinds of packing which depend on the cobalt chromium molybdenum CoCrMo powder quantity.
Cobalt chromium molybdenum CoCrMo powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Cobalt chromium molybdenum CoCrMo powder shipping: could be shipped out by sea, by air, by express, as soon as possible once payment receipt.
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boron powder, nitride powder, graphite powder, zinc sulfide, 3D printing powder, etc.
If you are looking for 3D printing metal powder, please feel free to contact us and send an inquiry, email address: firstname.lastname@example.org
Cobalt Chromium Molybdenum Properties
|Other Names||CoCrMo Super Alloy; Cobalt-Chromium-Molybdenum|
|Appearance||Gray to Black Powder|
|Solubility in H2O||N/A|
|Tensile Strength||780 to 1280 MPa (Ulitmate)/ 480 to 840 MPa (Yield)|
|Thermal Conductivity||13 W/m-K|
|Thermal Expansion||12 µm·m-1·K-1|
|Young's Modulus||210 to 250 Gpa|
Cobalt Chromium Molybdenum Health & Safety Information
Europe has been facing the gas shortage problem since the second half of 2021. The worsening situation in Russia and Ukraine has reduced Russian gas shipments to Europe, leading to a doubling of European gas prices. Energy shortages have sent electricity prices soaring. For these reasons, it is predicted that the price of the Cobalt Chromium Molybdenum will continue to increase.
Aluminium buyers in the US physical metal market have held off on new orders amid fears of a recession triggered by rising inflation and supply chain crises. Spot aluminium trading on the market has been suspended in recent weeks, according to indus…
Sodium myristate is ultra fine white powder, it has excellent lubricating, dispersing and emulsifying ability.…
The Biden administration plans to ease sanctions on Venezuelan oil to allow more of the country's crude to reach Europe. The U.S. will allow European companies still operating in Venezuela to immediately transfer more oil to the continent, while all…